Publications
Research Reports
DENTAL ADVISOR Research Reports provides dental manufacturers with a rapid publication of exciting, objective research information on dental products. Small research projects completed at DENTAL ADVISOR Biomaterials Research Center, DENTAL ADVISOR Infection Control Research Center, or at universities or independent test facilities are published in DENTAL ADVISOR Research Reports.
Laboratory Evaluation of Monet Laser Curing Light
Number 167 • January 2024
Complimentary Research Reports
2024
2023
June
No
3M RelyX Universal Resin Cement with 3M Scotchbond Universal Plus Adhesive-2 Year Retrospective Report
2022
September
No 157
RH-Pro11 Sterilization Validation of Handpiece Performance with Expanded Testing
September
No 156
DeltaFil Glass Ionomer Restorative Remineralization and Acid Erosion In-Vitro Evaluation
March
No 153
Fit Capability of Differing N95 Duckbill Surgical Respirators in Relation to NIOSH Standard Face Sizes and Shapes
December
No
3M RelyX Universal Resin Cement with 3M Scotchbond Universal Plus Adhesive-1 Year Retrospective Report
March
No
3M RelyX Universal Resin Cement and 3M Scotchbond Universal Plus Adhesive-Economic & Efficiency Impact Survey
2021
August
No 151
Bacterial Load Reduction Efficacy of the Conjunctive use of the TRIO Rx and MIST in a Dental Operatory
June
No 150
Air Purification and Bacterial Reduction Efficacy of the PURE BREEZE HEPA Air Purifier when used as a Whole Office Solution
2020
August
No 143
Non-Latex Dental Dam Tear Testing Comparison for Isodam (4D Rubber)
November
No 142
Cavex ImpreSafe: Linear Dimensional Change of Impression Materials Before and After Disinfection
September
No 141
A Comparison of Aerosol and Spatter with Genius.Shield and HVE or HVE Used Alone
September
No 140
Aerosol and Spatter Reduction Efficacy of Mr. Thirsty® and Alternative Products
2019
February
No 123
Laboratory Evaluation of Bulk EZ, a Dual-Cure Bulk-Fill Flowable Composite
2018
October
No 120
Comparison of Important Properties of Ecosite Bulk-Fill and Competitive Materials
June
No 117
Bond Strength of Parkell Universal Adhesive to Unground and Ground Enamel and Superficial Dentin
March
No 113
Comparison of Compressive Strength and Polishability of Beautfil II LS and Competitive Materials
2017
April
No
Cutting Performance Comparison of Various 1558 Metal Cutting/Transmetal Carbide Burs
2016
October
No 97
Effect of Accelerated 5-Year Exposure to Monarch Disinfectant Wipes on Tensile Properties of Dental Chair Fabrics
2015
September
No 76
Antibacterial Properties of a FiteBac Germicidal Hand Gel Formulation
September
No 73
Environmental Surface Wetness Test: Comparison of Disinfectant Wipes
June
No 71
Shear Bond Strength, Color Stability, and Stain Resistance of Ventura Nanolux Composite
February
No 68
Shear Bond Strength Comparison of a New Dental Cement to Different Adhesive Surfaces
January
No 65
Cleaning and Disinfection Investigation: Clorox Healthcare Hydrogen Peroxide Cleaner Disinfectant Wipes - Research Report
2014
August
No 61
Comparative Durability of Super-Snap X-Treme and Sof-Lex Disk Systems
July
No 60
Gloss of a Composite Finished with Super-Snap X-TREME and Two Other Polishing Systems
February
No 58
Comparative Curing and Thermal Properties of Demi Ultra LED Curing Light
2013
May
No 54
Savings Accomplished When Using MIXPAC T-Mixer and Critical Properties of Materials Mixed Using New MIXPAC T-Mixer Tips
2012
2011
2010
September
No 31
Effect of a Dental Water System Maintenance Additive on Bond Strength of a 7th-Generation Bonding Agent
August
No 30
Bond Strength of OptiBond XTR Sixth-generation, Type I Bonding Agent
2009
June
No 25
Effect of Lanolin- and Vitamin E-enriched Cyntek Powder-Free Latex Gloves on Skin Health - Research Report
Research Reports Archive
June
Vol
3M RelyX Universal Resin Cement with 3M Scotchbond Universal Plus Adhesive-2 Year Retrospective Report
September
Vol 158
Flexural Strength and Marginal Integrity of Amber Mill Direct
September
Vol 157
RH-Pro11 Sterilization Validation of Handpiece Performance with Expanded Testing
September
Vol 156
DeltaFil Glass Ionomer Restorative Remineralization and Acid Erosion In-Vitro Evaluation
March
Vol 153
Fit Capability of Differing N95 Duckbill Surgical Respirators in Relation to NIOSH Standard Face Sizes and Shapes
December
Vol
3M RelyX Universal Resin Cement with 3M Scotchbond Universal Plus Adhesive-1 Year Retrospective Report
March
Vol
3M RelyX Universal Resin Cement and 3M Scotchbond Universal Plus Adhesive-Economic & Efficiency Impact Survey
August
Vol 151
Bacterial Load Reduction Efficacy of the Conjunctive use of the TRIO Rx and MIST in a Dental Operatory
June
Vol 150
Air Purification and Bacterial Reduction Efficacy of the PURE BREEZE HEPA Air Purifier when used as a Whole Office Solution
August
Vol 143
Non-Latex Dental Dam Tear Testing Comparison for Isodam (4D Rubber)
November
Vol 142
Cavex ImpreSafe: Linear Dimensional Change of Impression Materials Before and After Disinfection
September
Vol 141
A Comparison of Aerosol and Spatter with Genius.Shield and HVE or HVE Used Alone
September
Vol 140
Aerosol and Spatter Reduction Efficacy of Mr. Thirsty® and Alternative Products
February
Vol 123
Laboratory Evaluation of Bulk EZ, a Dual-Cure Bulk-Fill Flowable Composite
December
Vol 122
Tokuyama Universal Bond Shear Bond Strength to Dentin, Enamel and Zirconia
October
Vol 120
Comparison of Important Properties of Ecosite Bulk-Fill and Competitive Materials
June
Vol 117
Bond Strength of Parkell Universal Adhesive to Unground and Ground Enamel and Superficial Dentin
March
Vol 113
Comparison of Compressive Strength and Polishability of Beautfil II LS and Competitive Materials
June
Vol 105
Important Properties of Filtek One Bulk Fill Restorative
April
Vol
Cutting Performance Comparison of Various 1558 Metal Cutting/Transmetal Carbide Burs
October
Vol 97
Effect of Accelerated 5-Year Exposure to Monarch Disinfectant Wipes on Tensile Properties of Dental Chair Fabrics
October
Vol 95
Effect of Accelerated 5-Year Exposure to Disinfectant Solutions on Tensile Properties of Dental Chair Fabrics
July
Vol 94
Correlation of Hu-Friedy Cleaning Monitors with Instrument Cleaning
January
Vol 90
Testing the Development of Staining of Instruments Cleaned with an Ultrasonic Cleaning Solution
March
Vol 82
Compatibility with Gypsum and Reproduction of Detail of Alginate Materials Stability Over Time
September
Vol 76
Antibacterial Properties of a FiteBac Germicidal Hand Gel Formulation
September
Vol 73
Environmental Surface Wetness Test: Comparison of Disinfectant Wipes
June
Vol 71
Shear Bond Strength, Color Stability, and Stain Resistance of Ventura Nanolux Composite
February
Vol 68
Shear Bond Strength Comparison of a New Dental Cement to Different Adhesive Surfaces
January
Vol 65
Cleaning and Disinfection Investigation: Clorox Healthcare Hydrogen Peroxide Cleaner Disinfectant Wipes - Research Report
October
Vol 63
Bond Strength of Several Bonding Agents Used with Self-Etch and Selective Enamel Etching Techniques
August
Vol 61
Comparative Durability of Super-Snap X-Treme and Sof-Lex Disk Systems
July
Vol 60
Gloss of a Composite Finished with Super-Snap X-TREME and Two Other Polishing Systems
February
Vol 58
Comparative Curing and Thermal Properties of Demi Ultra LED Curing Light
May
Vol 54
Savings Accomplished When Using MIXPAC T-Mixer and Critical Properties of Materials Mixed Using New MIXPAC T-Mixer Tips
April
Vol 53
Flexural Strength of the Speed versus the Standard IPS e.max CAD Crystallization Cycles
August
Vol 50
Water Sorption and Solubility of Light-Cured Resin-Based Dental Restorative Nanocomposites
May
Vol 47
Mechanical Properties of Original GC FujiCEM Automix and New GC FujiCEM 2 Automix Cement
April
Vol 46
Investigation of Prolonged Activity of FiteBac Germicidal Hand Gel
February
Vol 34
Bond Strength of Self-adhesive Resin Cements to Tooth Tissue and Ceramics
September
Vol 31
Effect of a Dental Water System Maintenance Additive on Bond Strength of a 7th-Generation Bonding Agent
August
Vol 30
Bond Strength of OptiBond XTR Sixth-generation, Type I Bonding Agent
June
Vol 29
Microbial Contamination of Patient Napkin Holders - Research Report
April
Vol 28
Gloss of a Provisional Composite Coated with SURFACE COAT Liquid Polish
June
Vol 25
Effect of Lanolin- and Vitamin E-enriched Cyntek Powder-Free Latex Gloves on Skin Health - Research Report
June
Vol 22
Comparison of the Fit of Crowns: 3M ESPE Lava Chairside Oral Scanner C.O.S. vs. Traditional Impressions
August
Vol 18
Bond Strength of Clearfil Esthetic Cement and Clearfil Ceramic Primer to Treated and Untreated Ceramics
March
Vol 10
Bond Strength of Adhesive Resin Cements to Tooth Structure as Affected by Moisture and Storage Time
March
Vol 09
Mechanical Properties of Flowable Resin Composites Using Different Curing Lights
March
Vol 08
Changes in Color before and after Polymerization and Gloss of Resin Composites