Page view compliments of GC America, Inc

GC FujiCEM Evolve

GC America, Inc


  • 34 Clinical Evaluators
  • 421 Total Uses
  • 96% Clinical Rating

Evaluators’ Comments

  • “Easy to use and easy to clean excess cement with tack-cure feature.”
  • “I liked the way it dispensed much better than what I use now.”
  • “Works just as well as the FujiCem 2 that I have used for years with unparalleled success.
  • “The color is easy for visualization.”
  • “Sensitivity is low for patients.”
  • “It took two cures to get the material to tack with our light.”
  • “The newly designed mixing tip was cumbersome to place and I had a tip pop off when trying to extrude.”
  • “Convenient auto-mix system.”


  • High-strength, all-ceramic (zirconia) crowns and bridges
  • Composite inlays, onlays, crowns, and bridges
  • All-ceramic inlays
  • Metal and porcelain-fused-to-metal (PFM) crowns and bridges

Clinical Tips

  • Make sure the tip is locked in properly before use.
  • Remove cement from contact points first before it sets too much.
  • Bench test tack feature before using the first time intraorally to determine the time needed with your curing light.
  • New tip design allows for automix or hand mixing material.



GC FujiCem Evolve is an innovative resin-reinforced glass ionomer cement with:

  • Trustful performance to lute any retentive zirconia, lithium disilicate, or metal-base restorations
  • Enjoyable convenience thanks to a modern delivery
  • High radiopacity
  • Locking tip

Unique Attributes

  • Highest bond strength to ziroconia among RMGI cements tested at DENTAL ADVISOR biomaterials lab
  • High radiopacity
  • Three-second tack cure
  • 4 minute 30 second set time after seating
  • No primer necessary when cementing retentive zirconia, lithium disilicate, or PFM restorations
  • Moisture tolerant