Futar® Fast Bite Registration Material

Consultants’ Comments

• “Easy to remove – does not lock into undercuts.”
• “Stiff but not brittle.”
• “Strong, even in paper-thin areas.”

Description

Futar Fast is an elastomeric, addition silicone, bite registration material with a working time of 15 seconds and an intraoral setting time of 45 seconds. Futar Fast is dispensed from a standard automix gun. Due to the shorter working time, Futar Fast is indicated for “small application” myofunctional bite registrations and applications requiring a hard bite registration. This material can be trimmed with a scalpel or a bur. Excess Futar Fast material can be easily broken off allowing the correct occlusal position to be checked intraorally promoting precise alignment of upper and lower models. Each box contains two 50 mL cartridges with 12 mixing tips. Futar Fast was evaluated by 30 consultants in 514 uses. This bite registration material received a 96% clinical rating.

Product Features

Futar Fast sets in a short time for a quick, accurate bite registration. Futar Fast trims easily with a scalpel blade or rotary instrument. Laboratory consultants also found it trimmed nicely without breaking. Models could be set together accurately, as Futar Fast does not exhibit any “spring” or rebound.  Seventy-seven percent of consultants would switch to Futar Fast, and 93% would recommend it.

Clinical Tips

• Dry the teeth before placement.